AudioControl SA-3051, Operation Manual

Page: 17 / 38

Note
The parallel PC printer interface standard does not require any baud rate, parity or stop bit settings.
You should not have to make any special settings in your printer to use the SA-3052.
CAUTION: Do not connect the SA-3052 to a serial interface printer (Apple, Point
of Sale, etc.). It will not print, and damage may be done to the
analyzer and/or printer.
Printing the display
is easy.
1. Connect a parallel printer to the
Printer Port on the rear of the
SA-3052.
2. Recall the response curve mem-
ory that you wish to print...or...
freeze the display.
3. Make sure that the printer is
loaded with paper, connected to
a power source, turned on, and
on-line.
4. Press the rear-panel p
rint
button.
Note
An abbreviated printout showing only the RTA curve may also be printed by double-clicking
(pressing twice quickly) the Print button.
Operation
3-3
Figure 3.1. Printout Example.
AUDIOCONTROL INDUSTRIAL
SYSTEM ANALYSIS
By:
Client _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Date _ _ _ _ _ _ _ _
Address _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Telephone _ _ _ _ _
City _ _ _ _ _ _ _ _ _ _ _ State _ _ _ _ ZipCode _ _ _ _ _ _
Job _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
System Components:
Comments _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Technician _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
AUDIOCONTROL SA-3052 SPECTRUM ANALYSIS
System Frequency Response--One Third Octave
25 50 100 200 400 800 1.6k 3.15k 6.3k 12.5k 20k
+12
+9
+6
+3
0
-3
-6
-9
-12
92
89
86
83
80
77
74
71
68
dB
Bass Midrange Treble
SA-3052 V.2.24 (C) 1977 AudioControl (425) 775-8461
*
*
* * * * * * *
* * * * * * *
* * * * * * * * * * * *
*
*