26
Zone Configuration Tab
Input Source:
This option allows you to
name the input source for your RS 500 -
like Rear Sub or Main Sub Out. You have
the option to change the input voltage
sensitivity here as well. Common AVR
outputs are in the 1V to 2V range - best
bet is to simply use 1.5Vrms.
Network:
This is where you enter in all your
network configuration settings if you are
setting up manually. If automatic, there’s
not much to do here other than ensure
the DHCP button is selected. If you are
having trouble connecting, the default
IP address of the unit 192.168.0.249. You
can connect manually peer to peer to
troubleshoot.
Notifications:
Set up this amplifier to alert
you to any parameter you want to flag.
Entering in the SMTP info here will allow
the amp to send you updates about it’s
health.
**extra space here to remind you to wash your
hands and use your mask
Speaker Profiles:
We often add new
models to the Speaker Partners Program
database. These can be downloaded
from audiocontrol.com and uploaded to
the amp here.
Firmware:
Update your firmware here. But
make sure you make a back up of your
settings below just in case.
Settings:
Here you can back up the setting
of your RS 500, all parameters are stored
to an external file.
