AudioControl User Manual -‐ Rialto 400
10
Two Source Set-‐Up
Opera;on
2
5
7
6
4
3
8
Typical Two Source Analog/Digital Set-‐Up configured with Digital Priority
1.
Connect one digital source to the Rialto 400
using the op`cal or COAX input.
2.
Connect one analog source to the Rialto 400
using the right (R) and leh (L)
analog inputs.
3.
From the Rialto 400 connect a pair of your favorite speakers to the right and leh speaker
outputs ensuring that polarity matches.
4.
Turn on the Rialto 400 by pressing the ‘power’ switch to on!
(Note: Whenever changing inputs, switch the Rialto 400 off first, make changes and then switch it back on).
5.
Set the Input Priority to ‘Analog or Digital’ depending on your preference
or set the Input Priority to ‘All On’ for no priority between inputs
6.
Adjust the volume on the back of the Rialto 400 using the digital volume and then repeat
using the analog volume to the desired volume seZng to work
with your source volume control.
7.
Adjust the level on the AudioControl AccuBASS™ to the desired
amount of bass response
to add bass and richness back to your music.
8.
Enjoy Making Good Sound Great with the Rialto 400.
8
1
Input Priority
(Digital Priority)
5
Summary of Contents for Rialto 400
Page 1: ......
