9
The cover plate must be removed to gain access to the controls, and
then sealed again to protect the controls against moisture and debris.
Removal Procedure
1. Locate the top six hex screws that hold down the sealed top
cover.
2. Use a 2.5mm hex wrench to remove the six screws.
3. Gently lift cover off. It’s a very tight fit there, so you may need to
use some gentle force. Yes, it is with you!
4. Keep the cover plate and screws in a safe and handy place, until
you have finished adjusting the controls to your immense satis-
faction.
Cover Plate Removal
