Page 7 of 17
AudioCodes™ MP-100/104 Gateway Quick Start Installation Guide
March 2004
10.
In the main BootP/TFTP Server screen, select
Clients
from the Services menu or click
. The following dialog appears. The Client Configuration dialog allows the client
(AudioCodes MP-104 gateway) to connect to the server application for code and con-
figuration updates.
11.
Click the Add New Client icon (
). Highlight the desired client (if you have more
than one client) in the list on the left, and configure the settings as described below.
•
Client MAC:
Enter the MAC address, which can be found on the bottom of the
MP-104 device.
•
Client Name:
Enter the desired name (e.g., mp104).
•
Template:
Select
<none>
.
•
IP:
Enter the IP address of the MP-104.
•
Subnet:
Enter the subnet mask of the MP-104.
•
Gateway:
Enter the gateway IP address of the MP-104.
•
TFTP Server IP:
Enter the TFTP Server IP address, if applicable.
•
Boot File:
Select
ramMP10XFXO.cmp
from the drop-down list. Then, add the
-
fb
switch after the file name (
ramMP10XFXO.cmp -fb
). This switch automati-
cally burns the
ram.cmp
into the flash memory.
•
INI File:
Select
MP1XXFXO_IT.ini
from the drop-down list.
•
Call Agent:
Enter the IPRC IP address.
12.
Click
OK
.
Add New Client Icon