Page 13 of 17
AudioCodes™ MP-100/104 Gateway Quick Start Installation Guide
March 2004
•
Channel Settings:
Configure the Channel Settings field, as described below.
All settings, except the following, should remain the same as they are shown in the
screen. For more details, refer to the
AudioCodes MP-104 User’s Manual.
—
DTMF Transport Type:
Should match the DTMF Encoding Setting on the
IPRC Device page.
If
G.711
is selected in the Audio Settings page on the IPRC Web page, the
DTMF Encoding Setting on the IPRC must be
G.711
, and the DTMF Trans-
port Type and MP Transport Type must be set to
Transparent MF
.
If
G.729
is selected in the Audio Settings page on the IPRC Web page, the
DTMF Encoding Setting on the IPRC must be
Out-Of-Band
, the DTMF
Transport Type must be set to
RFC2833 Relay DTMF
, and the MF Transport
Type must be set to
Relay MF
.
NOTE:
If
G711
is selected in the Audio Settings page on the IPRC Web page,
all
transport types (DTMF and V21/22/23/32/34 Modem) must be set to
Trans-
parent.
If
G.729
is selected on the IPRC, set the DTMF Transport Type to
RFC2833 Relay DTMF
and the Fax Transport Type to
Transparent
.
—
Fax/Modem Bypass Coder Type:
Select
G711MuLaw
for US Systems and
G711Alaw_64
for European Systems.
— If you are using Caller ID receivers, change the following settings as described
below.
•
Caller ID Transfer Type:
Select
MUTE
.
•
Caller ID Type:
Select
Bellcore
.
To apply the changes, click
SUBMIT
.
Required
for
Caller ID