AudioCodes MediaPack MP-114, User Manual

Page: 136 / 164

User's Manual 136 Document #: LTRT-71405
MediaPack Series
6.6.2.2 Configuration File
The Configuration File page enables you to restore/change (download a new ini file to the
Device) or backup the current configuration file that the device is using (make a copy of the
VoIP device’s ini file and store it in a directory on your PC).

Restore your configuration - If the VoIP device has been replaced or has lost its
programming information, you can restore the VoIP device configuration file from a
previous backup or from a newly created ini file. To restore the VoIP device
configuration from a previous backup you must have a backup of the VoIP device
information stored on your PC. (For information about restoring ini file defaults or
backup files, refer to 'Restoring and Backing Up the device Configuration'.)

Back up your configuration - If you want to protect your VoIP device programming.
The generated backup ini file contains values that have been set by the user or are
other than the default values.
Note: The ini file generated on the Web interface contains only the set of
parameters configurable on the Web interface. It is not possible to obtain a full
backup in case the configuration may have been modified using other methods (e.g.
uploading an ini file).
In the Configuration File page, you can bring an ini file from the device to a directory in your
PC, and send the ini file from your PC to the device.
Protect the device configuration by bringing the ini file from the device to your PC. Later, if
another device is replaced or loses its programming data, you'll be able to restore / send
the ini file backed up on your PC to the device.
The ini file is a proprietary configuration text file containing configuration parameters and
data. Sending the ini file to the device only provisions parameters that are contained in the
ini file.
The ini file with parameters set at their default values is on the CD accompanying the
device. The ini file can also be received as an e-mail attachment from AudioCodes'
Technical Support. Users can also generate their own ini file using AudioCodes' DConvert
utility (refer to the Utilities chapter in the Product Reference Manual).

To save the ini file to the PC:
1. Open the Configuration File page ( Maintenance tab > Software Update menu >
Configuration File ).
Figure 96: Configuration File Screen