Configuration Note
2. Setting Up FXS Lines on MP-1xx
Version 3.0
11
February 2013
2.3
Enabling the G.711 Codec
The procedure below describes how to enable the G.711 codec.
To enable the G.711 codec:
1.
Click
Configuration
>
VoIP
>
Coders and Profiles
>
Coders
; the Coders Table page
opens:
Figure 2-3: Coders Table
2.
On the first line, from the 'Coder name' drop-down list, select
G.711U-law
.
•
From the ‘Packetization Time’ drop-down list, select
20
.
•
From the ‘Rate’ drop-down list, select
64
.
•
From the ‘Silence Suppression’, select
Disabled
.
3.
On the second line, from the 'Coder name' drop-down list, select
G.711A-law
.
•
From the ‘Packetization Time’ drop-down list, select
20
.
•
From the ‘Rate’ drop-down list, select
64
.
•
From the ‘Silence Suppression’, select
Disabled
.
4.
Click
Submit
.
2
3
