4
|
P a g e
5
//
Reset pinhole button for resetting the device or restoring it to factory defaults. To
restore to factory defaults: with a paper clip or any other similar pointed object, press
and hold down the button for at least 12 seconds (but no more than 25 seconds).
6
S0 / WAN
WAN Ethernet ports:
DSL:
RJ-11 port for DSL WAN interface.
Green On
DSL link connected (trained) with peer ("showtime").
Green Fast-Flashing
Training up (connection in progress) and negotiating with
peer.
Green Slow Flashing
DSL port administratively up, but idle (not connected and
no peer detected).
Green Two Fast-Flashes
and then Idle Sequences
DSL port initializing itself after being enabled or upon
mode change.
Off
DSL port administratively shutdown or not configured
GE:
RJ-45 port for Gigabit Ethernet WAN interface.
Green On
WAN GE link established.
Green Flashing
Data received or transmitted.
Off
No WAN GE link or power not received by the device.
SFP:
SFP transceiver module for fiber optic WAN.
Green On
WAN fiber link established.
Green Flashing
Data received or transmitted.
Off
No WAN fiber link.
7
S1 / GE LAN
LED indicating Gigabit Ethernet LAN
Green On
Ethernet link established.
Green Flashing
Data received or transmitted.
Off
No Ethernet link.
8
S2 / BRI
RJ-45 ports for connecting BRI ISDN terminal equipment such as ISDN telephones or
PBXs.
Green On
Physical layer (Layer 1) is synchronized (normal
operation).
Red On
Physical layer (Layer 1) is not synchronized.
Off
Trunk is not active.