CHAPTER 1 Introduction
Mediant 800 Gateway & E-SBC | Hardware Installation Manual
1
Introduction
This document provides a hardware description of the Mediant 800 Gateway and E-SBC (hereafter
referred to as device) and step-by-step procedures for mounting and cabling the device.
The device supports the following interfaces (customer ordered):
■
E1/T1 (PRI):
●
Mediant 800B: Up to 2 E1/T1 port interfaces (over single copper wire pair).
●
Mediant 800C: Up to 4 E1/T1 port interfaces
■
Up to 8 BRI ports (supporting up to 16 voice channels).
■
Up to 12 FXS port interfaces.
■
Up to 12 FXO port interfaces.
■
12 LAN Ethernet interfaces - up to 4 Gigabit Ethernet ports and up to 8 Fast Ethernet ports.
These ports operate in port-pair redundancy, providing up to 6 port-pair groups.
■
Open Solutions Network (OSN) server platform for hosting third-party applications such as an
IP PBX.
■
Power:
●
Mediant 800B: Single AC power inlet
●
Mediant 800C: Single AC power inlet, and a DC power inlet (optional, customer ordered)
●
Mediant 800 includes two hardware revisions which differ as follows:
✔
Mediant 800B: Max. 2 E1/T1; AC power only
✔
Mediant 800C: Max. 4 E1/T1; AC and DC power (optional)
●
Hardware configurations may change without notice. Currently available hardware
configurations are listed in AudioCodes Price Book. For available hardware
configurations, contact your AudioCodes sales representative.
●
The Fast Ethernet ports are available only on "pure" SBC Mediant 800 (i.e., without
PSTN / Gateway interfaces).
●
For software configuration, refer to the
User's Manual
.
- 1 -
