AudioCodes Mediant 500 E-SBC, User Manual

Page: 748 / 920

User's Manual 748 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Description
configure voip > sip-definition
settings > max-gen-reg-rate
[MaxGeneratedRegistersRate]
(REGISTER messages) that the device sends (to a proxy or
registrar server) at a user-defined rate configured by the
GeneratedRegistersInterval parameter. The parameter is
useful in that it may be used to prevent an overload on the
device's CPU caused by sending many registration requests at
a given time.
The valid value is 30 to 300 register requests per second. The
default is 150.
For configuration examples, see the description of the
GeneratedRegistersInterval parameter.
Generated Registers interval
gen-reg-int
[GeneratedRegistersInterval]
Defines the rate (in seconds) at which the device sends user
register requests (REGISTER messages). The parameter is
based on the maximum number of REGISTER messages that
can be sent at this rate, configured by the
MaxGeneratedRegistersRate parameter.
The valid value is 1 to 5. The default is 1.
Configuration examples:

If you configure the MaxGeneratedRegistersRate parameter
to 100 and the GeneratedRegistersInterval to 5, the device
sends a maximum of 20 REGISTER messages per second
(i.e., 100 messages divided by 5 sec; 100 per 5 seconds).

If you configure the MaxGeneratedRegistersRate parameter
to 100 and the GeneratedRegistersInterval to 1, the device
sends a maximum of a 100 REGISTER messages per
second.
54.6.2 Network Application Parameters
The SIP network application parameters are described in the table below.
Table 54-30: SIP Network Application Parameters
Parameter Description
Signaling Routing Domain Table
Web: SRD Settings
EMS: SRD Table
CLI: configure voip > voip-
network srd
[SRD]
This table parameter configures the Signaling Routing Domains (SRD).
The format of the ini file table parameter is as follows:
[ SRD ]
FORMAT SRD_Index = SRD_Name, SRD_MediaRealm,
SRD_IntraSRDMediaAnchoring, SRD_BlockUnRegUsers,
SRD_MaxNumOfRegUsers, SRD_EnableUnAuthenticatedRegistrations;
[ \SRD ]
For a detailed description of this table, see ''Configuring SRDs'' on page
256 .
SIP Interface Table
Web: SIP Interface Table
EMS: SIP Interfaces Table
CLI: configure voip > voip-
network sip-interface
[SIPInterface]
This table parameter configures SIP Interfaces. The SIP Interface
represents a SIP signaling entity, comprising ports (UDP, TCP, and TLS)
and associated with a specific IP interface and an SRD. The format of
the ini file table parameter is as follows:
[ SIPInterface ]
FORMAT SIPInterface_Index = SIPInterface_InterfaceName,