AudioCodes Mediant 2000, User Manual

Page: 46 / 418

SIP User's Manual 46 Document #: LTRT-68808
Mediant 2000
3.3.8 Using the Home Page
The 'Home' page provides you with a graphical display of the device's front panel,
displaying color-coded status icons for monitoring the functioning of the device. By default,
the 'Home' page is displayed when you access the device's Web interface. When you are
configuring the device (in a configuration page), you can always return to the 'Home' page,
by simply clicking the
Home
icon on the toolbar. The 'Home' page also displays general
device information (in the 'General Information' pane) such as the device's IP address and
firmware version.
¾
To access the Home page, take this step:
„
On the toolbar, click the
Home
icon; the 'Home' page is displayed:
Figure 3-26: Areas of the Home Page
Note:
The number of channels displayed in the 'Home' page depends on the
device's hardware configuration.
The table below describes the areas of the 'Home' page.
Table 3-6: Description of the Areas of the Home Page
Item# /
Label
Description
1
Displays the highest severity of an active alarm raised (if any) by the device:
ƒ
Green = No alarms
ƒ
Red = Critical alarm
ƒ
Orange = Major alarm
ƒ
Yellow = Minor alarm
You can also view a list of active alarms in the 'Active Alarms' page (refer to “Viewing
Active Alarms” on page
245 ), by clicking the Alarms area.
2
Blade Activity icon:
ƒ
(green): Initialization sequence terminated successfully.
3
Blade Fail icon:
ƒ
(gray): Normal functioning.
ƒ
(red): Blade failure.