AudioCodes Media Pack MP-11x, User Manual

Page: 145 / 650

Version 6.6 145 MP-11x & MP-124
User's Manual 12. Network
12.7 Configuring NFS Settings
Network File System (NFS) enables the device to access a remote server's shared files
and directories and to handle them as if they're located locally. The device can use NFS to
load
cmp , ini , and auxiliary files through the Automatic Update mechanism (see 'Automatic
Update' on page 389 ).
You can configure up to 16 different NFS file systems. As a file system, the NFS is
independent of machine types, operating systems and network architectures. Note that an
NFS file server can share multiple file systems. There must be a separate row for each
remote file system shared by the NFS file server that needs to be accessed by the device.

To add remote NFS file systems:
1. Open the Application Settings page ( Configuration tab > System menu >
Application Settings ).
2. Under the 'NFS Settings' group, click the NFS Table button; the NFS Table page
appears.
3. Click the Add button; the Add Record dialog box appears:
Figure 12-8: Add Record Dialog Box for NFS
4. Configure the NFS parameters according to the table below.
5. Click the Submit button; the remote NFS file system is immediately applied, which
can be verified by the appearance of the 'NFS mount was successful' message in the
Syslog server.
6. To save the changes to flash memory, see 'Saving Configuration' on page 366 .
Notes:
•
To avoid terminating current calls, a row must not be deleted or modified while the
device is currently accessing files on that remote NFS file system.
•
The combination of 'Host Or IP' and 'Root Path' must be unique for each row in the
table. For example, the table must include only one row with a Host/IP of
192.168.1.1 and Root Path of /audio.
•
The NFS table can also be configured using the table ini file parameter
NFSServers (see 'NFS Parameters' on page
481 )