It is always best to plan the complete installation prior to attempting to install any product. The routing
of wires, power connections and mounting locations should be planned first. As with any car stereo installation,
and all work performed should be checked thoroughly and carefully prior to the operation of the system.
The placement of your Audiobahn speakers within your vehicle will greatly affect the overall
performance of your audio system. Every vehicle is different, so installation into particular locations of the
vehicle may not be possible without modifications. Factory provided locations are generally preferable due to
ease of installation. In all cases speakers should be placed in a location free of obstruction by body panels,
window cranks, storage compartments or anything that may hinder the speakers performance. Avoid areas that
do not provide a flat, sturdy mounting surface.
Audiobahn AS Series Dual Cone Speakerss are designed to fit into almost any factory location.
Again, if at all possible it is recommended that you use a factory location. This applies mostly to later model
vehicles. For those earlier models that do not have factory locations or are limited to front locations, it is
recommended that you choose an are with sufficient airspace.
If you allow an insufficient amount of airspace, the speaker may not reproduce low frequencies very
well. It is recommended to mount the speakers in door panels, kick panels, rear decks, etc. Ideally the speaker
should be mounted where it will be in an enclosed airspace allowing for extended bass response.
Choosing A Location
