Securing the Speaker
Once you have tested your system and confirmed that it is operating properly, turn off your system and
prepare for the final mounting of the speakers.
1) Position the speaker into the mounting hole and confirm the correct mounting location and hole
placement. Screw clips are provided to insure a snug fit. Place crew clips over the metal surface
and line up the hole with the hole you have previously drilled. Place the speaker into the hole. Align
the mounting holes and proceed to insert the screws. Be sure to tighten the screws evenly as
not to warp the speaker frame.
2) Turn your system back on to confirm the speakers proper operation. First test at low volume and
then you may steadily increase the volume as desired
Securing the Speaker
9
