ADVANCED MANUAL / bit Ten /
29
The following chapters detail the system adjustments and acoustic tuning features.
WARNING:
We recommend that you do not modify the settings of your
bit Ten
to explore its features.
Take your time to get familiar with the possibilities this software offers.
If you decide to leave the amplifiers connected to the
bit Ten
, remember to perform the adjustments keeping
the general volume at a level that does not damage the speakers in your system.
This window indicates whether the
bit Ten
is correctly connected to the PC and the DRC.
It also shows the device Firmware version.
Clicking the File tab, a drop-down menu appears
with the entries shown in the image:
1.
Load Setup:
the entire
bit Ten
configuration is loaded from a
previously saved file (e.g. “bitTenConfig.dip”).
This feature is available both in
TARGET
and in
OFF LINE
mode.
In
TARGET
mode, this lets you load all the settings that have
been previously saved. This is useful if you want to
resume all the settings you previously selected to install
another
bit Ten
with the same settings.
Output levels calibration and de-equalization, if any, must be repeated.
In
OFFLINE
mode, this lets you view the features you previously saved.
8.3
ADJUSTING ACOUSTIC REPRODUCTION
8
8.4
DEVICE INFO
1
1
2
8
3
5
9
4
11
6
7
10
8.5
“FILE” MAIN MENU
2
1
2
3
4
5
6
7
8
9
10
