1
．
Product Details
1
．
1
．
Specifications
Input Voltage
：
AC100-240V 50/60Hz
Power
：
320W
LED
：
32 pcs 10W 5-in-1 LED
Beam Angle
：
25
Life
：
min 50,000 hours
Control Mode
：
DMX
，
Master/slave
，
Auto-run
DMX Modes: 7 DMX working modes
DMX channel
：
12CH/3CH/4CH/5CH/6CH/7CH/3CH
IP Rating
：
IP20
Product Size
：
575*115*115mm
N.W.
：
5.0KG
1
．
2
．
Features
■
3 Control Modes
◆
External Control
DMX512 control
（
7DMX working modes
）
Master/slave control
◆
Auto-run
Onboard Program
Various gradul, puls color change
Various strobe effects: speed change (slow to fast), mix(colors
、
color change)……
Editable Programs
Functional,useful editable programs. Programs can be edited without
external controller. Programs like color change, step change, strobes, can
be combined ramdonly.
Prorgams can be downloaded from master light
◆
Static Color Mode
A certain color can be set without a controller, and strobe on that color is
available.
■
“Light Cut Software”
At “STAG” Mode, if the main dimmer is at value “0” when onboard
program or edited program is working, the light will be off,while program
is still working.
Difference to “BLACKOUT”: it is just for the lights,no effect to the
controller.
■
ID Setting
At “STAG”mode
，
Lights with the same ID(Max 66 ) can be controlled
seperately.Effects includes: light up one by one,color change,strobe,
gradul change,etc.
■
Non-linear and linear dimming
16 bit
（
60000 steps
）
■
White Balance
white color at different color tempreature
■
Color Reset
Software for adjusting the current.
■
Display Protection
Display will turn off if no work for 30 seconds, press any keep to exit the
protection mode.
■
Over-tempreature Protection
A certain value of tempreature can be set to protect the lights
■
Pass word for button operation
1
．
3
．
Fast Instructions
■
Mode change and setting
◆
At main menu, all functions showing on display are under external DMX
control.
◆
DMX512 is the default mode, the lights can only be controlled by DMX,
1
2
