manualshive.com logo in svg

Audio Technica ATW-R5220, User Manual

Share
Download
Audio Technica ATW-R5220 User Manual Download Page 21

20

Setting ATW-R5220/ATW-R5220DAN

Setting the AF level meter on the main screen

Switch the AF level meter on the main screen between [Receiver (Rx)] 
and [Transmitter (TX)].
•  The default setting is [RX].

1.  From the menu screen, turn the control dial, select [UTILITIES] 

and then press the control dial.

2.  Turn the control dial, select [AF METER] and then press the 

control dial.

3.  Turn the control dial, select [RX] or [TX] and then press the 

control dial.

•  The setting is complete.

Setting the display brightness

The default setting is [High].

1.  From the menu screen, turn the control dial, select [UTILITIES] 

and then press the control dial.

2.  Turn the control dial, select [BRIGHTNESS] and then press the 

control dial.

3.  Turn the control dial, select [High] or [Low] and then press the 

control dial.

•  The setting is complete.

Setting the user access level

Set the user access level.
•  The default setting is [Free Tuning].

1.  From the menu screen, turn the control dial, select [UTILITIES] 

and then press the control dial.

2.  Turn the control dial, select [ACCESS] and then press the control 

dial.

3.  Turn the control dial, select [Free Tuning] or [Group Only] and 

then press the control dial.

Free Tuning

No limit

Group Only

Selection of frequency can be made only 
from group.

•  The setting is complete.

Resetting

This returns the receiver settings to their factory defaults.

1.  From the menu screen, turn the control dial, select [UTILITIES] 

and then press the control dial.

2.  Turn the control dial, select [RESET] and then press the control 

dial.

3.  Turn the control dial, select [Yes] and then press the control dial.

4.  After the confirmation screen is displayed, turn the control dial 

again to select [Yes] and then press the control dial.

•  Reset starts.

Checking the receiver information

This function displays product information such as the version of the 
receiver.

1.  From the menu screen, turn the control dial, select [UTILITIES] 

and then press the control dial.

2.  Turn the control dial, select [VERSION].

Summary of Contents for ATW-R5220




































Reviews:

No comments

Brands by name

Popular brands

Load more brands