8
Connections
Example system configuration
Connect while referring to the figure below.
*1 Sold separately.
*2 Used when connecting to a network. Only ATW-CHG3N can be connected.
Linking (when using multiple units)
1. Remove the caps for DC jacks.
2. Connect the AC adapter to the first unit, and connect the link
cable to the DC output jack for linking. Next, connect the link
cable to the DC input jack for linking on the second unit.
• Connecting an AC adapter to the second unit or any unit thereafter is not
necessary.
• You can add up to four ATW-CHG3 units, for a total of 5 connected units.
3. Fasten the link plate with link plate screws.
AC adapter (AD-SA1230XA)*¹
Network cable
(Type: RJ45)*²
ATW-CHG3
/
ATW-CHG3N
ATW-CHG3
ATW-CHG3 Link kit (AT8687)*¹
Up to 5 units
(4 additional units
connected)
Contents
• Link plate
• Set of link plate screws
• Link cable
AC adapter
Link cable
Link plate
Set of link plate screws
Set of link plate screws
(First unit)
(Second unit)
Connect to outlet
