7
Using the product
1. Connect the AC adapter.
• Pass the cord along the groove on the product and bring it out from the
cord outlet.
2. The power indicator lights up and the power turns on.
3. Turn off the device that will be charged and insert it into a
charging port on the product.
• You can charge up to two devices at the same time.
• Check the orientation of the device that will be charged before inserting
it. It cannot charge if the orientation is incorrect.
• When charging a handheld transmitter, attach the microphone capsule.
• Although we recommend that you charge a device while it is off, you
can also charge while it is on. In such cases, the device will turn off
automatically.
4. The status indicator lights up and the charging status is
displayed.
• For more about indicators' lighting sequences, refer to “Indicators”
• Charging completes in about 6.5 hours (when using 1900 mAh
rechargeable batteries).
• Use devices after they are fully charged.
• If a transmitter with fully charged batteries is placed in the charger,
the red light will remain on for a minimum of 3 hours, even though the
batteries are fully charged.
• If you insert a device and the status indicator flashes, there may be a
charging defect.
• Non-rechargeable batteries cannot be charged. If non-rechargeable
batteries are inserted, a charging defect may be displayed.
• If a charging defect occurs, unplug the AC adapter to turn off the
product, and then restart it. If the indicator still flashes even after
restarting the product, the rechargeable batteries may no longer have
any life. Replace them with new rechargeable batteries.
Connect the AC adapter
Turn off
Status indicator
