background image

3

Notes on use

•  Be sure to read the connected device’s user manual before use.
•  Audio-Technica will not be liable in any way for any loss of data in 

the unlikely event that such losses should occur while using the 
product.

•  On public transportation or in other public places, keep the volume 

low so as not to disturb other people.

•  Minimize the volume on your device before connecting the 

product.

•  When using the product in a dry environment, you may feel a 

tingling sensation in your ears.  
This is caused by static electricity accumulated on your body, not 
by product malfunction.

•  Do not subject the product to strong impact.
•  Do not store the product in direct sunlight, near heating devices, 

or in hot, humid, or dusty places.

•  When the product is used for a long time, the product may 

become discolored due to ultraviolet light (especially direct 
sunlight) and wear.

•  Make sure to hold the plug when connecting and disconnecting 

the USB charging cable.  
The USB charging cable may become severed or an accident may 
occur if you pull on the cable itself.

•  When you are not using the USB charging cable, disconnect it 

from the product.

•  If the product is placed in a bag while the USB charging cable is 

still connected, the USB charging cable may become caught, 
severed, or broken.

•  When you are not using the product, store it in the included case.
•  This product can be used to talk on the phone only when using a 

mobile telephone network. Support for telephony apps that use a 
mobile data network is not guaranteed.

•  If you use the product near an electronic device or transmitter 

(such as a mobile phone), unwanted noise may be heard. In this 
case, move the product away from the electronic device or 
transmitter.

•  If you use the product near a TV or radio antenna, noise may be 

seen or heard in the television or radio signal. In this case, move 
the product away from the TV or radio antenna.

•  To protect the built-in rechargeable battery, charge it at least once 

every 6 months. If too much time passes between charges, the life 
of the rechargeable battery may be reduced, or the rechargeable 
battery may no longer be able to be charged.

•  When charging the product, keep it away from direct sunlight and 

charge in a well-ventilated place.  
The battery may deteriorate and shorten the continuous usage 
time, or the battery may no longer be able to be charged.

•  Charging this product in wet condition should be avoided. Doing 

so may result in malfunction.

•  Do not bend the ear hanger more than necessary. Doing so may 

result in breakage.

•  If the product will not be used for an extended period of time, 

store it in a well-ventilated place free from high temperatures and 
humidity.

•  Do not leave the product inside of a car under the blazing sun. 

Doing so may result in malfunction.

•  The hear-through mode of the product allows you to hear the 

sounds around you while wearing the product through the built-in 
microphone. Depending on the volume of the music being played 
back, the surrounding sounds may be difficult to hear. In this case, 
turn down the volume of the music.

•  Depending on your surroundings, the surrounding sounds may be 

difficult to hear even when using the product’s hear-through 
mode. Do not use the product in places that are dangerous if you 
cannot hear the surrounding sounds, such as places with heavy 
traffic.

•  Operate the touch sensor with one finger. Operating with a 

sharp-tipped object, such as a ballpoint pen or pencil, may result 
not only in incorrect operation, but also damage to the touch 
sensor or breakage.

•  Do not touch the touch sensor with your fingertips. Doing so may 

result in injury such as broken fingernails.

•  If the product does not operate at all or as intended when 

touched, check to make sure that your other fingers, parts of your 
hand, or clothing hems are not in contact when touching. Also, 
the product may not operate correctly if you are wearing gloves or 
if your fingertips are dry.

•  The product may not operate correctly if the touch sensor is dirty 

from sweat. Remove the dirt before operating the product.

•  The waterproof performance of the product is designed to prevent 

the ingress of liquids from sweating during operation and simple 
washing (equivalent to IPX5).

•  Although the product has waterproof capabilities equivalent to 

IPX5, there may be no sound or the sound may be difficult to hear 
if water enters the headphones because the part where the sound 
comes from is not water-resistant.

•  The product is not completely waterproof. Do not intentionally 

submerge or use it in water.  
Also, do not expose it to liquids other than sweat and water (such 
as soapy water).

•  If dirt such as sweat or sand adheres to the product, wash it with 

normal temperature (10 to 35 °C (50 to 95 °F)) fresh water or 
gentle-flowing tap water instead of soapy water. Do not directly 
expose the “part where the sound comes from” (not water-
resistant) to water. For details, refer to “Cleaning” in the Operating 
Instructions, which can be downloaded from our homepage, to 
remove the dirt.

•  The product is not designed to be dampproof. Do not use the 

product in environments with high humidity (such as bathrooms 
or saunas). Doing so may result in malfunction.

Waterproof performance

Summary of Contents for ATH-SPORT70BT


















Reviews: