background image

15

Headphones

Type

Dynamic

Driver

9 mm

Sensitivity

93 dB/mW

Frequency response

20 to 20,000 Hz

Impedance

16 ohms

Microphone

Type

Electret condenser

Polar pattern

Omnidirectional

Sensitivity

-42 dB (1 V/Pa, at 1 kHz)

Frequency response

50 to 8,000 Hz

Communication specifications

Communication system

Bluetooth version 4.1

RF output

6 mW EIRP

Maximum communication range

Line of sight - approx. 10 m (33')

Frequency band

2.402 GHz to 2.480 GHz

Modulation method

FHSS

Compatible Bluetooth profiles

A2DP, AVRCP, HFP, HSP

Support codec

AAC, SBC

Supported content protection method

SCMS-T 

Transmission band

20 to 20,000 Hz

Other

Power supply

DC 3.7 V lithium polymer battery

Charging time

Approx. 3 hours*¹

Operating time

Continuous transmission time (music playback): Max. approx. 6 hours*¹*²
Continuous standby time: Max. approx. 14 hours*¹

Weight

28.5 g (1.0 oz)

Operating temperature

5 °C to 40 °C (41 °F to 104 °F)

Accessories

• USB charging cable (30 cm (1') USB Type A / Micro USB Type B)

• Eartips (XS, S, M, L)

• Comply™ foam eartips (M)
• Case

Sold separately

• Eartips

*1  The time may vary depending on usage conditions.

*2  Playing time is the same in the hear-through mode.

For product improvement, the product is subject to modification without notice.

•  The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under 

license.  All other trademarks are property of their respective owners.

•  The “AAC” logo is a trademark of Dolby Laboratories.

Specifications

Summary of Contents for ATH-SPORT70BT


















Reviews: