12
Connecting via Bluetooth
To connect the product to a Bluetooth device, the product needs to pair (register) with the device.
Pairing a Bluetooth device
• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
• Wear the product to hear voice guidance during pairing.
1
Starting with the product turned off, turn it on.
• The indicator lamp will light in white, and then flash in white.
2
Use your Bluetooth device to begin the pairing process and search for the product. When your
Bluetooth device finds the product, “ATH-CKS330XBT” will be displayed on the device.
• For information about using your Bluetooth device, refer to the device’s user manual.
3
Select “ATH-CKS330XBT” to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be called a
passcode, PIN code, PIN number, or password.
Bluetooth
ON
ATH-CKS330XBT
The voice guidance will play the message “Bluetooth connected”, and the indicator lamp will
flash slowly in white. This indicates pairing was successfully completed.
About pairing
When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the
product are paired, you do not need to pair them again. The product supports multipairing, in which a connection
history is saved. However, in the following cases you will need to pair again even if the Bluetooth device was paired
once:
• If the product is deleted from the Bluetooth device’s connection history.
• If the product is sent out for repair.