Control Voltage Out
When a microphone channel turns “on,” as indicated by a Selected Channel LED on the front
panel, the channel’s associated Control Voltage Out goes “high” (+4 VDC). This signal can be
used to light indicator lamps, switch speaker zones on and off, select video cameras, etc.
The
control voltage should not be connected directly to an inductive load such as a relay coil, as dam-
age to the mixer may result.
Several interface circuit possibilities are shown in Figure 5.
Figure 5. Control interface examples.
9
Summary of Contents for AT-MX341b SmartMixer
Page 12: ...P52324 2011 ...
