Audio Technica AT-MX341b SmartMixer, Installation And Operation Manual

Page: 5 / 12

AT-MX341a Rear Panel
1. Power input. Requires 12 volts AC or 15-18 volts DC, either polarity; 300 mA.
2. Link In /Out. Provides for daisy-chaining of multiple mixers when more than four
microphones are used.
3. Control Voltage Out. Provides 0 to +4 VDC (active high) to trigger external devices such
as speaker switching, camera switching and indicator lights.
4. Output. Balanced line-level output. Can be changed to mic-level output via internal
switch (see page 7). XLRM-type connector.
5. Inputs. Balanced microphone inputs for low impedance dynamic or condenser mics.
Can be changed to line-level inputs via internal switches (see page 7). XLRF-type connectors.
Figure 2. Rear panel
5
➋ ➊
➎ ➌ ➍
Link In Link Out
Output Input
3
Input
2
Input
1
12V AC/15
-
18V DC
Control Voltage Out
1 GND 2 3 4
Input
4
Lockout
Manual
Priority Pre-select
1 2 3 4
-20 -10 -6 -3 0 +3 +6
Output Level Master
Threshold
Master
Level
Gain 1 Gain 2 Gain 3 Gain 4
Power
AUTOMATIC MICROPHONE MIXER
AT-MX 341b
Selected Channel