8
Playing a record
Pausing the record
1. After lowering the volume of the amplifier, speakers,
etc. sufficiently, press the tonearm lift button to lift the
tonearm.
Stopping the record
Once the record has played to the end, the tonearm will
automatically return to the tonearm rest.
To manually stop the record, do the following.
1. Lower the volume of the amplifier, speakers, etc. sufficiently.
2. Press the STOP button.
•
Once the record stops playing, the tonearm automatically
returns to the tonearm rest.
3. Remove the record after the platter has come to a
complete stop.
•
When the tonearm reaches the end (center) of the record, it will
automatically lift and return to the tonearm rest. Do not interfere
with its motion. Doing so can cause the product to malfunction.
If the tonearm does not lift and return to the tonearm rest, press
the STOP button to complete this operation.
•
If the felt mat gets dirty, it can easily scratch the record, so
remove the felt mat periodically and wipe off any dust.
•
To prevent the record from scratches and warping, remove it
after use.
•
Do not use a disk stabilizer.
•
Do not use a platter other than the one provided.
•
This product is not intended for DJs. Do not touch the record or
the platter while the record is playing.
Care
Turntable body
•
When the turntable body is dirty or dusty, first disconnect the
AC adapter, and then wipe off the dirt and dust with a soft,
dry cloth.
•
Do not use benzenes, thinners, etc.
•
When storing the product for a long time, disconnect the AC
adapter from the outlet and wrap the product in plastic; do
not allow it to become damp.
Stylus tip
•
If dirt and grime are stuck to the stylus tip, clean it with a
commercially sold brush.
•
We recommend using a stylus cleaner (sold separately) if the
stylus tip is considerably dirty. Clean the stylus tip by moving
the brush from the rear to the front of the stylus tip.
