background image

3

Safety precautions

Although this product was designed to be used safely, failing 
to use it correctly may result in an accident. To ensure safety, 
observe all warnings and cautions while using the product.

Important information

Warning:

To prevent fire or shock hazard, do not expose this apparatus 
to rain or moisture.

Caution:

 

Do not expose this apparatus to drips or splashes.

 

To avoid electric shock, do not open the cabinet.

 

Refer servicing to qualified personnel only.

 

Do not expose this apparatus to excessive heat such as 

sunshine, fire or the like.

 

Do not subject this apparatus to strong impact.

 

This apparatus should be located close enough to the AC 

outlet so that you can easily grasp the AC adapter at any time.

 

In case of emergency, disconnect the AC adapter quickly.

 

Do not place any objects filled with liquids, such as vases, on 

this apparatus.

 

To prevent fire, do not place any naked flame sources (such 

as lighted candles) on this apparatus.

 

Do not install this apparatus in a confined space such as a 

bookcase or similar unit.

 

Install this apparatus only in the place where ventilation is good.

 

The rating label is put on the bottom of this apparatus.

For customers in the USA

FCC Notice

Warning:

This device complies with Part 15 of the FCC Rules. Operation 
is subject to the following two conditions: (1) This device may 
not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may 
cause undesired operation.

Caution:

You are cautioned that any changes or modifications not 
expressly approved in this manual could void your authority to 
operate this equipment.
Note: This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to part 
15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of 
the following measures:

 

– Reorient or relocate the receiving antenna.

 

– Increase the separation between the equipment and receiver.

 

– Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

 

– Consult the dealer or an experienced radio/TV technician for 

help.

Safety precautions

For customers in the Canada

IC statement:

CAN ICES-3 (B)/NMB-3(B)

Notes on use

Turntable body

 

Do not set and use the product in locations that are 

considerably hot or humid, dirty, or subject to extreme 

vibrations.

 

The product should be positioned on a flat, level surface.

 

When closing the dust cover, close it completely. Do not open 

the dust cover during playback.

Cartridge

 

Attach the provided protector to the cartridge when the 

product is not in use.

 

Do not touch the stylus of the cartridge with your finger.

 

Do not allow the stylus to bump against the platter, felt mat, 

or edge of the record.

Summary of Contents for AT-LP60X













Reviews: