14
E
N
Specifications
Turntable specifications
Type
3-Speed, fully manual operation
Motor
16-pole, 3-phase, brushless DC motor
Drive method
Direct drive
Speeds
33-1/3 RPM, 45 RPM, 78 RPM
Turntable platter
332 mm diameter die-cast aluminum
Starting torque
>4.5 kgf.cm
Braking system
Electronic brake
Wow and flutter
< 0.1% WRMS (JIS WTD) with 33 RPM
Signal-to-noise ratio
> 55 dB (DIN-B)
Output levels
“PHONO”
“LINE (MM)”
5.5 mV nominal at 1 kHz, 5 cm/sec
300 mV nominal at 1 kHz, 5 cm/sec
RIAA
20-20kHz, +1/-3dB (In: 1.5mV 1kHz)
Tonearm specifications
Type
Static balanced S-shaped tonearm
with detachable headshell
Effective length
230 mm
Overhang
15 mm
Maximum tracking error angle Less than 3°
Stylus pressure adjustment
range
0 to 4.0 g
Applicable cartridge weight
range (including headshell)
13 to 18 g
Height of tonearm adjustment
range
0 to 6 mm
Anti-skating range
0 to 3 g
Cartridge and headshell specifications
Cartridge Model
AT-XP5
Cartridge Type
VM
Recommended load
impedance
47,000 ohms
Output voltage
5.5 mV (1 kHz, 5 cm/sec)
Stylus
0.3 × 0.7 mil bonded elliptical stylus
Cantilever
ABS with carbon
Tracking force range
2.0 to 4.0 g (3.0 g standard)
Cartridge weight
6.2 g (0.22 oz)
Headshell model
AT-HS1
Headshell weight
10 g (0.35 oz)
Headshell overhang
adjustment
± 4 mm
USB function
A/D, D/A
16 bit 44.1 kHz or 48 kHz USB
selectable
Computer interface
USB 1.1 Compliant Windows 7 or
above, or MAC OSX or above
General specifications
Power supply requirements
120V AC, 60 Hz (U.S.A)
240V AC, 50 Hz (Australia)
230V AC, 50 Hz (Singapore)
Power consumption
13 W
Dimensions
450 mm (17.72") × 353 mm (13.90")
× 166.5 mm (6.56")
(W × D × H)
Weight
12.5 kg (27.6 lbs)
Accessories
Slip mat, dust cover, platter, 45 RPM
adapter, counterweight, headshell
with cartridge, power cable, USB
cable, dual RCA (male) cable with
integrated ground wire, stylus target
light
Replacement stylus
(sold separately)
ATN-XP5
Replacement headshell
(sold separately)
AT-HS1
Specifications are subject to change without notice due to
improvements.
