Audio Technica AT-HA5050H, Instruction Booklet, Page: 18 / 52

18
Rear panel
⑩
XLR input terminals (BALANCED)
Use an XLR cable (optional) to connect to a CD player or other
device equipped with XLR output terminals.
⑪
Line input terminal (LINE)
Use an audio cable (optional) to connect to a CD player or
amplifi er line output terminals. Jack is pin-shaped.
⑫
Input attenuator switch (ATTN)
This is a -12 dB input attenuator. Use this when a large signal
level is input.
⑬
USB input terminal (USB)
Use a USB cable (optional) to connect to a computer.
⑭
USB connection mode selector switch
Switches between asynchronous mode and adaptive mode.
Make selection based on environment of computer to be
connected.
⑮
Digital coaxial input terminal (S/PDIF)
When digital input is performed, use a coaxial digital cable
(optional) to connect to the device equipped with the digital
output.
⑯
Power cable inlet (~ AC IN)
Connect the power cable.
Part names and functions
En
g
lis
h