10
Remote Turn-on
The Reference 150 SE has a built-in 12V DC
remote turn-on/off circuit for operation
by a master control system in a home
theater or large audio system. Use a 3.5mm
(.140”) diameter mini plug to connect to
the +12V IN jack on the rear of the
Reference 150 SE.
The +12V IN jack should be connected to
the +12V DC output of the master control
system, using a cont12V DC signal at
12mA per Reference 150 SE for the duration of
amplifier on-time. Do not use a momentary
or data pulse control signal.
The +12V DC remote jacks have polarity
protection, so they will not operate if a -12V
DC signal is accidentally connected, or if the
control wires are reversed.
When the 12V DC remote turn-on/off circuit
is used, the power switch on the front panel
should be turned off.
Connections
