PROCEDURE FOR:
REF75SE Update
PAGE: 2 of 11
ISSUED: 3/20/2015
4.0.
PROCEDURE
4.1.
Panel and Input Wire Removal
4.1.1.
Remove 18 – #6 Screws that secure the Top Cover to the Chassis.
4.1.2.
Remove Top Cover.
4.1.3.
Discharge the Power Supply!!
Refer to Figure 1 and 2 for the Discharge Points
Figure 1
Figure 2
4.1.4.
Remove the 4 – KT120 and 2 – 6H30P Tubes.
4.1.5.
Use a large tip Solder Iron to remove 6 – Output Wires from the 2 – XLR Connectors.
Refer to Figure 3 for an example of an adequate Tip
Refer to Figure 4
