Audio Precision APx1701 Series, Installation Instructions Manual

Page: 19 / 44

APx1701 Transducer Test Interface: Installation 1
Installation
Introduction
The APx1701 is an accessory device that must be used in
conjunction with both an Audio Precision APx analyzer
instrument (sold separately) and a connected personal com-
puter (PC). The APx1701 will not operate without a USB
connection to the PC running the APx measurement soft-
ware, as part of an APx analyzer system.
Installation and safety information for the APx analyzer
instrument, the required APx500 measurement software
(version 4.3 or later) and PC system requirements can be
found in the
Installation and Specifications
booklet pro-
vided with the APx analyzer.
Using the APx1701
To use the APx1701, first connect the APx analyzer instru-
ment to the PC and launch the APx500 measurement soft-
ware. Software installation instructions and hardware
connection information are provided in the documentation
included with the analyzer instrument.
The manual APx500 User’s Manual is available
as a PDF on the APx500 Application Disc and
online at ap.com.
Setting Up the Hardware
Connecting your APx1701 to the electrical
mains supply
The APx1701 Transducer Test Interface must be connected
to a 50–60 Hz alternating current (ac) electrical mains sup-
ply. The minimum voltage is 100 Vac; maximum voltage is
240 Vac. The instrument is fitted with a universal power
supply that does not require voltage configuration or change