- -
2
PRECAUTIONS
♦
Never touch the power cord with wet hands.
♦
Always pull the power cord out by the plug, not by the cord.
♦
Never expose the system to rain, moisture, excessive heat and magnetism.
♦
Never let an inexperienced person repair or reassemble the unit.
♦
Never put anything, especially metal, into the unit.
♦
Never place excessive weight on the unit.
POWER REQUIREMENTS
Power requirements for electrical equipment differ from area to area. Please ensure
that your unit meets the power requirements in your area. The power requirement for
your transport is marked on the serial number plate on the rear panel.
♦
If you are in doubt, please contact your dealer before plugging the unit into the
mains supply!
CLASS 1 LASER PRODUCT
This product contains a low power laser device. To ensure continued safety, do not
remove any covers or attempt to gain access to the inside of the product. Refer
servicing to qualified personnel.
Make Your Contribution to Protect the Environment
Used batteries with the ISO symbol for recycling, as well as small accumulators
(rechargeable batteries), mini-batteries (cells) and starter batteries should not be
thrown into the dustbin. Please leave them at an appropriate depot.
This equipment conforms to No. 62/499/EEC, 87/308/EEC standard.
Summary of Contents for CDT ZERO Transport
Page 3: ...3 2...
