AUDIO INTERNATIONAL, INC.
4/98
9
Document #540107, Rev. IR, Model No.: RCD-02201-x
2.8
Connector / Mating Connector Information
Mating connector part numbers are as follows:
Model #
Connector
Mating Connector
RCD-022-01-1
RD15M10JV30 RD15F10JVL0
RCD-022-01-2
DAMA-15P DAMA-15S
D20418-2 Female Screw Lock
Antenna BNC
Amphenol 413779-4
2.9
Post Installation Test
2.9.1 The audio signal output of the unit is generally connected to cabin speaker
systems in addition to headphone locations. It is important to verify that
all equipment has been set to the recommended initial settings. Verify all
connections before supplying power to the unit.
2.9.2 Utilize the front panel controls to turn “ON” the AM/FM tuner. Utilize
the AM/FM random search button to select a desired radio station. Verify
that the station can be heard through the speaker and/or headphone system.
2.9.3 Load the CD player with selected material. Verify that the RCD
automatically plays back the selected CD. Use the front panel controls or
the hand-held remote control unit to select track search, PLAY, PAUSE,
EJECT, etc. Verify that all functions are operational. Verify that the RCD
audio can be heard through the speaker and/or headphone system.
3.0 Operation
3.1
CD Player Operation
Load the CD player with selected material. The unit will automatically begin
playing the CD. Verify that the selected material may be heard. The output level
gain adjustment potentiometers on the rear of the unit are preset at the factory to
2V RMS. Contact AI if adjustments are needed. If a CD is in the unit, and power
is removed, the CD must be ejected and reinserted to resume play once power is
reapplied.
3.2 Radio
Operations
To operate the AM/FM radio, apply power to the unit by turning the tuner power
to the “ON” position. Use the AM/FM random search button to select the desired
radio station. The station numbers will appear in the digital window as they are
“tuned” in.
