Audio International, Inc. DVD-024-01/03-x Installation Manual
Document #540149, Rev. IR, 1/2000
Page 11 of 13
3.9 Post-Installation
Test
3.9.1 Verify that all audio and video outputs are available to the
appropriate distribution system(s).
3.9.2 Load a DVD disc into the video player. Use the DVD front-panel
controls or the hand-held remote control unit to select PLAY.
3.9.3 Check for a picture on the appropriate monitor(s) and verify that the
DVD audio can be heard through the speaker and/or headphone
systems.
3.9.4 Refer to Section 4.0, Troubleshooting.
4 Troubleshooting
4.2 General Troubleshooting Procedures
Many problems can be isolated with the following general techniques:
•
To verify power to the unit, r28 VDC power is applied to the
proper pins (refer to Section 3.8) on the unit. Use a voltmeter to verify
correct level.
•
To reset, remove power from the unit for at least one minute and
reapply power. Verify the problem still exists.
•
Recheck all connections to the unit for security. Recheck all pinouts
for application accuracy.
4.3 Troubleshooting Chart
