12
maintained and cleaned. It also already comes with the cut in points pre-adjusted for minimum dead
space. Please see
www.proxfade.co.uk
for more information on how to adjust and clean the crossfader.
Also check our website
www.audioinnovate.com
for information on accessories for cleaning and
adjusting the crossfader.
***VERY IMPORTANT: Because of the skill required to adjust and clean the crossfader, you shall
refer this operation to a qualified technician. The power cord must be unplugged before servicing or
damage to the unit may result. The faceplate and only the faceplate should be removed using a Phillips
screwdriver to access the crossfader. Knobs should all be removed by hand or very carefully lifted with
a screwdriver to avoid scratching and product damage. Please make sure that all parts are kept in a bin so
they are not misplaced prior to reassembly.
***SPECIAL NOTES FOR CLEANING THE CROSSFADER: In order to remove the crossfader
case for lubrication, you will first need to loosen the Phillips screw at the bottom of the crossfader.
Otherwise, you may damage the crossfader case when trying to remove it. In addition, please follow the
instructions for lubrication exactly or the fader will either be over-lubricated, causing fader noise, or
under-lubricated, causing the fader to wear more quickly.
Summary of Contents for AEM-100i
Page 15: ...15 BLOCK DIAGRAM...
