14
Rev.1.3
Charging a battery
1 Turn off microphone.
2 Connect the micro-USB plug of the charger to the DC input terminal of the
microphone.
Insert the
micro-USB plug into the DC input terminal of the microphone.
After connecting the microphone to the charger, the charge indicator (red) indicates the
charging status as follows:
Blinking
(2 seconds interval lights): Charging
* In the case of a complete discharge state, the first about 1 minute red LED lights RED.
ON:
Charging completed or battery is empty.
Blinking
(500 milliseconds interval lights): Charge Error.
Likely indicating that the temperature of
the battery may be out of the acceptable range. Confirm that the temperature is within the
acceptable range.
OFF:
No connected a charge connector or no battery installed.
Important:
• If the microphone is connected to the charger with the power turned on, the microphone will power
off and start charging.
Button operation does not work when connected to the charger.
Note:
• If the charger remains connected after charging is completed, it will not restart charging to make up
for any battery life lost due to self-discharge.
• If the microphone is turned off and the charger is connected, but the charge indicator does not light,
check that all connections from the micro-USB plug down to the charger are properly plugged in.
• Charging takes up to 4 hours (5 V / 500 mA), but that time varies depending on status of use.
CHG
BATT
TALK
Charge indicator
DC input terminal
[rear]
PWR LINK
AUDIO IN
DC IN
Micro-USB plug
(Charge only Micro-USB Cable)
TALK push-button