Projector fasteners vary in size and length. Provided with the mount are the most
frequently used fasteners. If the fasteners provided do not fit your projector, research
the correct type of fastener in your projector manual and purchase them at your
local hardware store.
Included are rubber spacers that may or may not be needed to attach the legs to
your projector.
It is very important to use the partially threaded screws and the plastic washer to
attach the legs to the base plate. The fully threaded screws are for extending the
legs.
The assembly goes as follows: baseplate- plastic washer - leg - partially threaded
screw
There are many different ways to use the parts to accommodate different size
projectors.
Attach all legs.
Attach the base plate to your projector after preparing it.
5
