6
Audio Design Associates
www.ada-usa.com
PTM-3245
www.ada-usa.com
7
Input Connections to the ADA Suite 16
1. Plug one end of an interconnect cable into Zone 1 white Left (L) input jack of the amplifier.
2. Plug the other end of this cable into the white Left output jack on the P-16 Audio Preamplifier
Board of the Suite-16.
3. Plug one end of an interconnect cable into Zone 1 red Right (R) input jack on the PTM-3245.
4. Plug the other end of this cable into the red right output jack on the P-16 Audio Preamplifier
Board on the Suite-16.
5. Repeat steps 1-4 for each channel you will be connecting.
Input Connections to Other Controllers or Preamplifiers
1. Plug one end of an interconnect cable into Zone 1 white Left (L) input jack of the amplifier.
2. Plug the other end of this cable into the white Left output jack on the multiroom controller or
preamplifier.
3. Plug one end of an interconnect cable into Zone 1 red Right (R) input jack on the PTM-3245.
4. Plug the other end of this cable into the red right output jack on the multiroom controller or
preamplifier.
5. Repeat steps 1-4 for each two-channel zone you will be connecting.
+
L
- -
R
+
ZONE 2
16-2
Ω
10K
1 2 3 4
1
L
R
2
3
4
5
6
P-16
Suite 16 Preamplifier Module P-16
ZONE 1
16-2
Ω
10K
R
10K
10K
4 3 2 1
1 2 3 4
+
L
- -
R
+
1 2 3 4
PTM-3245 Rear Panel
Figure 2: Input Connections to the ADA PTM-3245
