8
Advanced Features
Advanced DSP (EQ)
Set a filter type for each zone.
• Bypass (B) no filter (default setting)
• High Pass (HP)
• Low Pass (LP)
• High Shelf (HS)
• Low Shelf (LS)
• Parametric (P)
Frequency attenuation
• 1 Hz - 20KHz
Gain adjustments
• -15 db and +15db
Balance
Network Settings
• DHCP ON/OFF (default OFF)
• SDDP ON/OFF (default ON)
• Static IP Address (default 10.10.10.1)
• Netmask (default 0.0.0.0)
• Gateway (default 0.0.0.0)
System Trigger
• Audio Sense / Audio Sense + Trigger
Contact Closure
• Select Contact 1 or 2
• Select Mode (Momentary / Toggle)
• Select Type (Audio Override / Scene Preset)
• Select Audio Override (1-10) or Scene (1-10)
*Groups
• Group Naming (1-10)
• Select Zones to include in each of 10 Groups.
*Scenes
• Scene Naming (1-10)
• ON/OFF select (default OFF)
• Volume level
• Source selection
• Power (ON/OFF)
• Mute ON/OFF (default OFF)
*Overrides
• ON/OFF select (default OFF)
• Zone selection (1-16)
• Source selection (1-16) or Flexport (1-4)
• Volume level (default = 0)
• Priority (1-10) or Flexport (1-4)
Sleep Timer
• 1,2 or 5 minutes
• OFF (default OFF)
Display Brightness
• Adjust 0 - 100 (default 100%)
Lockouts
• Front panel controls
• Front panel IR
Many of the advanced features are used only with third party controllers. The PC Setup Utility
is the most efficient way to set up SF-16M advanced features, and provides an easy way to
save an archive of each configuration to work on off-site, or for backup.
For more detail, see
video tutorials at
www.audioauthority.com/sonaflex_tip4. The following settings can only be
configured using Ethernet/serial commands or the PC Setup Utility (
not front panel controls
):
SONAFLEX
• VIDEOS
•
FAQ
• TUTORIALS
4
*These advanced features may not be compatible with third party controllers.
