background image

S/N Ratio:

96dB

Channel Separation:

70dB(channel to channel @1kHz)

Input Sensitivity: 

0.5Vrms

Input Z Impedance:

FPM-U: 20k Ohms, FPM-D: 75 Ohms, FPM-X and FPM-B: 2k Ohms

Accepted Bit Rates (FPM-D)

44.1, 48, or 96KHz 

Dimensions (H x W x D):

4 x 1.65 x 3.65 including mounting tabs; 2.8 x 1.65 x 3.65 without tabs (inches)

Net Weight:

9.5 oz. (270g)

Shipping Weight:

12 oz. (340g)

Approvals

FCC

Warranty:

Two years, parts and labor

FlexPort Transmitter Specifications

Limited Warranty

If this product fails due to defects in materials or workmanship within two years from the date of the original sale to the 

end-user, Audio Authority guarantees that we will repair or replace the defective product at no cost. Freight charges for the 

replacement unit will be paid by Audio Authority (Ground service only). A copy of the invoice from an Authorized Re-seller 

showing the item number, serial number, and date of purchase (proof-of-purchase) must be submitted with the defective unit 

to constitute a valid in-warranty claim.

Units that fail after the warranty period has expired may be returned to the factory for repair at a nominal charge, if not dam-

aged beyond the point of repair. All freight charges for out-of-warranty returns for repair are the responsibility of the customer. 

Units returned for repair must have a Customer Return Authorization Number assigned by the factory.

This is a limited warranty and is not applicable for products which, in our opinion, have been damaged, altered, abused, 

misused, or improperly installed. Audio Authority makes no other warranties either expressed or implied, including limitation 

warranties as to merchantability or fitness for a particular purpose. Additionally, there are no allowances or credits available 

for service work or installation performed in the field by the end user.

2048 Mercer Road, Lexington, Kentucky 40511-1071 USA

Phone: 859-233-4599 • Fax: 859-233-4510

Customer Toll-Free USA & Canada: 800-322-8346

www.audioauthority.com • [email protected]

v 1.5.0

752-634

20151202

This product has been tested by an accredited laboratory and meets theprovisions of FCC 47 CFR Part 15.

(b) Operation of an intentional, unintentional, or incidental radiator issubject to the conditions that no harmful 

interference is caused and thatinterference must be accepted that may be caused by the operation of an

authorized radio station, by another intentional or unintentional radiator,by industrial, scientific and medical 

(ISM) equipment, or by an incidentalradiator.

(c) The operator of a radio frequency device shall be required to ceaseoperating the device upon notification 

by a Commission representative thatthe device is causing harmful interference. Operation shall not resume 

untilthe condition causing the harmful interference has been corrected.

Summary of Contents for FlexPort FPM-X









Reviews: