background image

Audio Authority AVAtrix, 1156 and 1166 User Manual      5

Other Materials You May Need 

•  Patch cables (RCA, optical and 3.5mm). 
•  Infrared emitters and/or infrared remote control receivers—for Model 9878 IR functionality.
•  Cat 5e/6 cable—for Models 1170 and/or 1176; consider buying a different jacket color for A and B cables.
•  RJ-45 plugs—for Models 1170 and/or 1176; EZ RJ-45 plugs are recommended.
•  Professional network cable tester—for Cat 5 cables; continuity testing is not adequate; the twisted pairs 

must be properly matched for balanced line transmission.

Suggested Audio Authority Accessories 

•  Model 1170 High Definition Cat 5 MultiDriver

 Expander—each expander allows up to six Model 9878 

Wallplates to deliver the same content as the Model 1166 output. Maximum 36 Wallplates per system.

•  Model 1172 Audio Interface—one required for each Model 1170 or 1176. Provides a connection point for 

for a separate whole house audio distribution system.

•  Model 1176 High Definition Cat 5 Matrix Router—each Router allows up to six Model 9878 Wallplates to 

select any one of the six source inputs to Model 1166. Maximum 36 Wallplates per system.

•  Model 9878 Cat 5 HDTV Connection Plates (Wallplates)—allow Model 1170, 1171, or 1176 outputs to be 

widely distributed via two Cat 5 cables per Wallplate.

•  Model 1192 Rack Mounting Adapters—1166 or 1156 fit 19-inch spacing on EIA rack centers (2 rack units).
•  Model 1191 Rack Mounting Adapters—1170 or 1176 fit 19-inch spacing on EIA rack centers (2 rack units).

•  Model 1108 IR Router. Plug into the IR Out jack to allow multiple sources to be individually addressed by 

9878 Wallplates. For more detail, download the 1108 manual from www.audioauthority.com.

•  Model 1183 Active Video DC Blocker—for video sources with DC present in the video output.
•  Model 802-567 4-port bus cable—for up to 3 expanders or routers.
•  Model 802-568 7-port bus cable—for up to 6 expanders or routers.
•  Model 1311 DVI + Digital Audio to HDMI Converter—for HDMI TV displays.
•  Model 1312 HDMI to DVI + Digital Audio Converter—for HDMI sources.
•  Model 1351 DVI Repeater—for long DVI cable runs.
•  Model 1391 HDMI EQ/Extender—for long HDMI cable runs.
•  Model 1361 Down Converter—converts component video to composite video.
•  Model 1362 Up Converter—converts composite or S-video signals to component video or VGA.
•  Model 1365 Video Scaler—converts YPbPr to RGVHV or VGA to YPbPr.
•  Audio Authority DVI and HDMI high quality connecting cables and DVI-HDMI adapters.

RGB

Projector

DVI

TV Display

HDMI

TV Display

DVI

TV Display

Component

Video Display

S-Video or

Composite

Video Display

DVI

1362

Y Pb Pr Source

HDMI Source

PC

DVI Source

Composite Source

1312

1365

1166

VGA

YPbPr

YPbPr

DVI

YPbPr

DVI

1351

1311

DVI

DVI

MAIN OUTPUT

(YPbPr)                                                               (DVI)

DVI

YPbPr

YPbPr

1365

RGBHV

HDMI

 (Long Cable)

HDMI

1361

S-V

ideo

YPbPr

Video Converter Illustrations 

Many possibilities exist for 
adapting or actively converting 
various signal types to work with 
the 1166. Refer to the accessory 
descriptions above. Dotted lines 

show alternate configurations. 

Summary of Contents for AVAtrix

























Reviews: