17
16
Warning: Risk of injury!
In some very rare cases the dome may remain in the ear
canal on removal. Should this happen, please contact your
doctor or hearing care professional at once. Please do not
try to remove the dome yourself
Lift your hearing aid and slide it carefully over the outer part of
your ear. Carefully pull the tube with the earpiece out of the ear
canal. Switch the hearing aid off by moving the battery com-
partment to the OFF position.
3.5.3 Removing hearing aids
3.6 Volume control and program selection
3.6.1 Automatic side balancing of hearing aids
If you have had two hearing aids of the same type adjusted by
your hearing care professional, they are synchronised as a pair.
You can tell this because after your devices have been switched
ON, the pairing melody plays in both hearing aids.
After the hearing aids have been paired, all settings made in one
device are also activated to the second device. The tones and
melodies are played in both hearing aids with a slight delay.
If the connection is broken, you do not need to take action. The
devices renew the connection quickly by themselves. You can
tell this because after your devices have been switched ON, the
pairing melody plays in both hearing aids.
Your hearing aids feature a multifunc-
tional rocker switch for controlling
the volume and selecting the different
programs.
The multifunctional rocker switch can
be activated by pressing the top (+) and
bottom end (–).
3.6.2 Multifunctional rocker switch
Volume control
To control the volume, press the multifunctional rocker
switch briefly on the top or bottom (also see 3.6.3).
Program selector switch
To change the program, press and hold multifunctional
rocker switch briefly on the top or bottom (also see 3.6.4).
Volume control and program selector switch
combined
To control the volume, press the multifunctional rocker
switch briefly on the top or bottom. To change the pro-
gram, hold the switch down for approx. 1 second (see also
3.6.3 and 3.6.4).
