2
3
S
afety
I
nformatIon
Hearing Safety:
This product is designed to amplify
sounds to a high volume level
which could potentially cause hear-
ing damage if used improperly. To
protect your hearing and the
hearing of others:
1. Make sure the volume is turned
down before putting on the
earphone or headphone before
adjusting the volume to a
comfortable level.
2. Set the volume level at the
minimum setting that you need
to hear.
3. Do not allow children or other
unauthorized persons to have
access to this product.
WIR RX18 Receiver: 2.3 MHz, 2.8 MHz, Stereo
Instructions For Use & Care
CAUTION!
B
attery
S
afety
& D
ISpoSal
Do not attempt to recharge
disposable batteries, which may
explode, release dangerous chemi-
cals, cause burns, or other serious
harm to the user or product.
p
acemaker
S
afety
1. Before using this product with
a pacemaker or other medical
device, consult your physician or
the manufacturer of your pace-
maker or other medical device.
2. If you have a pacemaker or other
medical device, make sure that you
are using this product in accordance
with safety guidelines established
by your physician or the pacemaker
manufacturer.
CAUTION!
CAUTION!
r
ecyclIng
I
nStructIonS
Help Williams Sound protect the environment! Please take the time to
dispose of your equipment properly.
Product Recycling:
Please do NOT dispose of your Williams Sound equipment in the house-
hold trash. Please take the equipment to a electronics recycling center;
OR, return the product to the factory for proper disposal.
Battery Recycling:
Please do NOT dispose of used batteries in the household trash. Please
take the batteries to a retail or community collection point for recycling.
09/05/09
Before you begin using the RX18 receiver, make sure the IR transmitter
being used is transmitting on 2.3 MHz or 2.8 MHz frequencies. Make
sure the audio source is on, and the receiver battery is fully charged.
The RX18 Receiver has an automatic on/off function. When you put the
receiver on, it turns on. When you take the receiver off, it turns off. Use
the 3-position selection switch to choose from 2.3 MHz, 2.8 MHz, or stereo
mode. Rotate the Volume Control to adjust the volume to a comfortable
listening level.
A dual detector infrared “eye” is located on the front of the receiv-
er. Do not cover it up or you will lose reception. Make sure the
“SOUND PLUS” label is facing away from you when you put the
receiver on.
The RX18 Receiver should be charged when not in use.
Optional 5 bay battery charger: CHG 518. CHG 518 charges BAT AP07D
NiMH rechargeable batteries
Fig. A (Front View)
FRM 703C ©2011 Williams Sound, LLC.
o
peratIng
I
nStructIonS
