background image

6

7

Safety Information

Box Contents and Setup

Important Safety Instructions

Please read all of these instructions and save 

them for later reference before connecting

the DC power adapter to the mains and 

powering up Sono.

To prevent electrical shock and fire hazard 

follow all instructions on the 12VDC power 

supply. Sono itself does not operate with any 

high voltage mains supply inside the unit but 

appropriate safety measures should still be 

adhered to regarding the AC/DC supply.

Please ensure you only use the included Sono 

power supply. We cannot recommend the 

usage  of third party power supplies. In the 

event of a power supply failure do not open 

the 12VDC supply. If required, please contact 

Audient support so that a suitable replacement 

can be sourced. 

audient.com/support

Sono utilises an external switch-mode power 

supply that is very quiet and rated at 2A. This 

switch-mode design will accept any A.C 

line voltage from 100v to 240v @  50/60Hz. 

Therefore the unit will work anywhere in the 

world but please ensure your A.C mains line 

voltage is within this specification.

Consult a qualified technician if you suspect 

difficulties. Do not attempt to tamper with the 

power supply or mains voltages - 

HAZARDOUS 

TO HEALTH

.

 Ensure that the appropriate 

international pin adapter is fitted to the power 

supply before insertion into the mains socket.

Valves must be replaced by a qualified 

technician.

In your Sono packaging you should find the 

following items: 

•  Sono

•  12V DC Power Supply with Regional 

Adaptors

•  USB Type C cable

•  USB Type C to Type A Cable

•  Quick Start Guide 

Please visit

 

www.audient.com/products/

sono

 

to download the latest Sono software 

supporting documentation and brochures for 

our product range. 

The 12V DC power supply comes with 

interchangeable UK, EU, US and Australian 

Socket Adaptors and will work across a 

broad range of Mains Voltages, making Sono 

globally portable.

We hope that you enjoy using Sono!

! WARNING !

TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

APPARATUS TO RAIN OR MOISTURE.

NO USER SERVICEABLE PARTS INSIDE. 

PLEASE REFER SERVICING TO  QUALIFIED SERVICE PERSONNEL.

Summary of Contents for Sono
































Reviews: