Audient AZTEC, Operation Manuals, Page: 8 / 64

8
Getting Started Getting Started
© aud ient
6/2002
D-OUT
D-IN
dB
0
10
30
20
40
0 -10
0
25 60
dB
GAIN
LINE
The provision of the fully
balanced D-IN ‘remix’ input,
again on D-Sub connectors
in groups of 8, allows Aztec
to be used for post-produc-
tion of recorded perform-
ances preserving EQ and FX
configurations used in the
original show.
Audio Sub-Group outputs
are available on a D-sub
connector as well as XLRs, for rapid
recorder connection if required.
Using LCR Using LCR
A fully balanced, level
variable direct record out is
available on jack and, in
groups of 8 channels, on D-
sub connectors wired in
accordance with Tascam
DA98 format. This allows
simple connection to one or
more 8 track recorders.
Recording Recording (continued)
The Aztec LCR MAIN output bus routing system uses
two controls - a Left/Right pan control and a Blend
control. This allows a centre cluster to be used to ‘an-
chor’ a lead vocalist while still feeding the main Left/
Right stacks to ensure adequate coverage.
The pan operates in the normal way with a constant-
power law. The Blend control adjusts the proportion of
the signal sent to the Left/Right buses and the Centre
bus.