For those with an ASP510 Surround Controller, it is possible
to integrate the console Solo and Dim functions, triggering the
appropriate behaviour on the controller.
Pressing a Solo on the console will switch the input of the ASP510
to the Control Room Output of the ASP8024-HE console. A guide
track can be fed to the ASP510 via console Auxes 7-8, and monitored
using the Guide On button on the ASP510.
The ASP510 link is made using a DB25 connection found on the
rear of the console, near the Multi-track Bus connections (exact
positioning changes depending on individual console configurations).
The pin connections are made as follows:
Signal Number Console Interface
1
Control Room Input Left
2
Control Room Input Right
3
Guide Track Input Left
4
Guide Track Input Right
5
Remote Dim Sense
6
Remote Solo Sense
NOTE This link uses a male to female DB25 cable.
52
ASP510 Mod
