SOURCE SELECT BUTTONS
Allows you to select which source you would like
to monitor in the control room. Mix takes audio
from the Mix Bus and Ext 1-3 takes audio from
the three external inputs found in the Master
Section rear connector panel.
MAIN
Sends your selected source to the device
connected to the Main Output of the ASP8024-
HE, normally the main monitors.
ALT 1-3
Sends your selected source to one of the
Alt Monitor Outputs, Often used for smaller
monitors or ‘grotboxes’. Switching to Alt 3 will
send the output to the built in headphone
output found in the Master Meter section.
MONO
Sums the left and right channels of the monitor
output to mono in order to check the mono
compatibility of a mix.
LEFT, RIGHT, CUT
Allows you to cut either the left, right or both
monitors.
DIM
Reduces the level of the main output by a set
amount. Dim will be switched in automatically
when talkback is used to reduce the possibility
of feedback.
1
2
3
4
5
6
1
2
3
4
5
6
22
control room
