Audibax THUNDER 350 RGB User Manual Download Page 4

THUNDER 

350 RGB

USER´S

MANUAL

2

11

54-channel mode

12.Please contact the nearest authorized technical assistance center. 

Always use the same type spare parts.

13.DO NOT touch any wire during operation as high voltage may cause 

electric shock.

Warning:

1.To prevent or reduce the risk of electrical shock or fire, do not expose the 

unit to rain or moisture.

2.The housing and lenses must be replaced if they are visibly damaged.

Caution:

There are no user serviceable parts inside the unit. Do not open the housing 

or attempt any repairs yourself. In the unlikely event your unit may require 

service, please contact your nearest dealer.

Installation:

The fixture should be mounted via its Omega Quick Release Clamp bracket. 

Always ensure that the unit is firmly fixed to avoid vibration and slipping while 

operating and make sure that the structure to which you are attaching the 

unit is secure and is able to support a weight of 10 times of the fixtures 

weight. Always use a safety cable that can hold 12 times of the weight of the 

fixture when installing.

The equipment must be installed by professionals. It must be installed in a 

place where is out of the reach of people and no one can pass by or under 

it.

Channel 

Value 

Function 

000-255 

Red 0-100% 

LED Group 1 

000-255 

Green 0-100% 

000-255 

Blue 0-100% 

000-255 

Red 0-100% 

LED Group 2 

000-255 

Green 0-100% 

000-255 

Blue 0-100% 

000-255 

Red 0-100% 

LED Group 3 

000-255 

Green 0-100% 

000-255 

Blue 0-100% 

10 

000-255 

Red 0-100% 

LED Group 4 

11 

000-255 

Green 0-100% 

12 

000-255 

Blue 0-100% 

13 

000-255 

Red 0-100% 

LED Group 5 

14 

000-255 

Green 0-100% 

15 

000-255 

Blue 0-100% 

16 

000-255 

Red 0-100% 

LED Group 6 

17 

000-255 

Green 0-100% 

18 

000-255 

Blue 0-100% 

19 

000-255 

Red 0-100% 

LED Group 7 

20 

000-255 

Green 0-100% 

21 

000-255 

Blue 0-100% 

22 

000-255 

Red 0-100% 

LED Group 8 

23 

000-255 

Green 0-100% 

24 

000-255 

Blue 0-100% 

25 

000-255 

Red 0-100% 

LED Group 9 

26 

000-255 

Green 0-100% 

27 

000-255 

Blue 0-100% 

Summary of Contents for THUNDER 350 RGB

















Reviews: