Audi connect
Search for the MMI system via the Bluetooth
device search function on your mobile phone.
� Select and confirm the desired mobile phone
from the list of Bluetooth devices shown.
� Enter the PIN to establish a connection on your
mobile phone. Or: If the PIN is already being
displayed on your mobile phone, confirm it on
the phone and in the MMI. You have about 30
seconds to enter the PIN.
� Then enter the PIN code for your SIM card in
the MMI.
Please note any additional system queries on
your mobile phone, e.g. whether the phone
should connect automatically in the future. On
some mobile phones, you may also need to
download the directory separately.
After connecting successfully
The signal strength symbol
@
and the Bluetooth
symbol
@
q
page 121, Fig. 126
will appear in
the status line of the infotainment display when
the mobile phone has been connected successful
ly.
You can now use Audi connect.
� Select:
I
MENU! button>
Audi connect.
� Confirm the system query of whether an Inter
net connection should be established with
Ac
cept.
(D
Note
- Bluetooth devices only have to be bonded
once. Depending on the mobile phone you
are using, any devices that have already
been bonded to the MMI system are connec
ted automatically when they are within
range and the ignition is on. You can bond
several mobile phones to the MMI system;
however only one connection is active at a
time.
- You receive the SIM PIN and the PUK from
your mobile network service provider to
gether with the SIM card. If you enter the
SIM PIN code incorrectly three times
1>
in a
row, the SIM card will be be blocked. A PUK
ll The number of possible attempts depends on the SIM
card.
148
(personal unblocking key) must be entered
in order to reactivate the SIM card.
- The Bluetooth connection between the sys
tem and the mobile phone is automatically
terminated when you leave the car.
- For further information regarding your mo
bile phone, contact your mobile network
service provider or refer to the operating in
structions for your mobile phone. For infor
mation on using a phone in your car, please
go online (e.g. www.audi.com/bluetooth) or
ask an Audi dealer.
Using a personal Wi-Fi hotspot
Applies to: vehicles with Audi connect
Important
The vehicle must be stationary, and the ignition
must be switched on.
Your mobile device and mobile network provider
must support the mobile Wi-Fi hotspot function.
The personal Wi-Fi hotspot on your mobile device
must be activated.
Other devices must be permitted to access the
mobile hotspot.
The Wi-Fi mode
hotspot and client
must have
been selected in the MMI
qpage 152.
Connecting the MMI to a personal hotspot
� Select:
I
MENU
I
button
>Telephone>
right con
trol button >
Wi-Fi settings > Wi-Fi mode.
� Select and confirm
hotspot and client.
� Then select and confirm
Network search.
The
devices found will be shown on the infotain
ment display.
� Select and confirm your personal Wi-Fi hotspot
from the list.
� You may need to enter the password specified
by your mobile device.
� Select and confirm OK.
..,.